LG EU96 Series Скачать руководство пользователя страница 34

Страница: 34 / 63

ENGLISH

Lock Mode

•

If ‘Lock Mode’ is ‘Yes’, the following features will be unavailable.

USB

•

If it is set to ‘Enable’, USB devices do not work in relative features. (Exclude S/W update)

Factory Reset

•

If it is set to ‘Enable’, User Menu

General

Reset to Initial Settings

is disabled.

Crestron

(Depending on model)

•

This function enables synchronization with applications provided by Crestron.

•

Server: This menu sets the server’s IP address for the network connection with the server. (equipment provided by Crestron)

•

Port (1024~65535): This menu sets the port for the network connection with the server. The default port number is 41794.

•

IP ID (3-254): This menu sets a unique ID for synchronizing with the application.

Welcome Video

(Depending on model)

Welcome Video Mode

•

You can set to Off, Once or Repeat.

Video Download

•

You can download video file from USB.

•

Video file locate LG_DTV folder.

Reset

•

Delete Downloaded video file.

Operation

•

The video displays after your TV is turned on and the boot logo appears.

•

If Welcome Video is enabled and a video is downloaded on the TV, the video plays.

•

The time it takes a video to be displayed may differ depending on the decoding time of the video.

•

Controls for playing the video are not available. (Pause, stop, fast forward, etc.)

•

Videos in any file format that the TV supports can be downloaded and displayed.

Developer Mode

(Depending on model)

•

This feature provides great convenience to the app developers.

•

Set up to install the Developer mode app.

Содержание EU96 Series
































































Результаты поиска

Содержание EU96 Series

Отзывы:

Похожие инструкции для EU96 Series

Бренды по названию

Популярные бренды

LG EU96 Series, Руководство по установке

Результаты поиска

Содержание EU96 Series

Отзывы:

Похожие инструкции для EU96 Series

Бренды по названию

Популярные бренды