LG DFB325 Series Скачать руководство пользователя страница 52

Страница: 52 / 56

TROUBLESHOOTING

Black or gray marks on

dishes

Aluminum items rubbing dishes during cycle

• Reposition the dishes.

Yellow or brown film

on inside surfaces of

appliance

Coffee or tea stains

• Eliminate the stain by using a stain removal product.

Yellow water remains

inside the dishwasher.

When initially using the appliance, Yellow water may generate in the

water softener tank.

• This is a normal condition, and it is harmless to humans. It disappears after

1 - 3 cycles.

Spots and filming on

dishes

Wrong amount of detergent used

• Use the recommended amount of detergent.

Overloading

• Do not overload the appliance.

Improper loading

• See the

OPERATION

section.

Insufficient water pressure

• Water pressure should be between 0.05 - 0.6 MPa.

Insufficient detergent

• Add the recommended amount of detergent. See the

OPERATION

section.

Rinse aid dispenser is empty.

• Refill rinse aid dispenser.

The water softener has no salt or insufficient the salt.

• Check whether there is the salt in the water softener.

Water hardness level may be set too low.

• Increase the hardness level setting value.

The rinse aid may be insufficient.

• Refill the rinse aid or increase the dispensing level.

Hard water buildup in the tub

• Remove all dishes, cutlery basket and cutlery basket holder from

appliance. Only racks should remain in tub. For best results, use citric acid

powder (can be found in canning sections of most grocery stores or

online). Measure 3 tablespoons (45 g) of citric acid powder. Fill main wash

compartment with measured powder. If you cannot find citric acid

powder, pour approximately 3/4 - 1 1/4 cups (200 - 300 mL) of white

vinegar into shallow bowl and place in upper rack. Run

Auto

cycle. Do not

use detergent. When the cycle finish, run it again.

Symptoms

Possible Cause & Solution

Содержание DFB325 Series

























































Результаты поиска

Содержание DFB325 Series

Отзывы:

Похожие инструкции для DFB325 Series

Бренды по названию

Популярные бренды

LG DFB325 Series, Руководство пользователя

Результаты поиска

Содержание DFB325 Series

Отзывы:

Похожие инструкции для DFB325 Series

Бренды по названию

Популярные бренды