LG DFB325 Series Скачать руководство пользователя страница 41

Страница: 41 / 56

OPERATION

ENGLISH

any spilled salt inside the appliance may cause rust

or damage to the appliance if the left unwashed.
When the salt refill

icon illuminates, it means the

salt is almost empty. If necessary, refill the salt

chamber.

CAUTION

• Do not add detergent or any other solution into

the water softener housing other than

dishwasher salt. Doing so will cause the water

softening system to malfunction.

Useful Tips

Drying

• Plastic items may cause poor drying results

compared to other items.

• To assist drying, the door can be opened for a

short period of time after the cycle.

NOTE

• Make sure that all items do not touch each other.
• If dry results are not good or water stains

remain, add the

Extra Dry

option or set the rinse

level.

• When using tablet type (2 in 1, 3 in 1) detergent,

an additional rinse may be required, depending

on the volume of dishes, in this case use the

Extra Dry

option or set the rinse level.

Unloading the Dishwasher

• Before unload the dishes, check if the dishes

cooled down to hand-warm condition.

• Empty the lower rack first and then the upper

one. It will avoid water dripping from the upper

rack onto the dishes below.

WARNING

• Do not pull out all full loaded racks at on time,

the appliance can topple over. Unload each rack

one by one.

Содержание DFB325 Series

























































Результаты поиска

Содержание DFB325 Series

Отзывы:

Похожие инструкции для DFB325 Series

Бренды по названию

Популярные бренды

LG DFB325 Series, Руководство пользователя

Результаты поиска

Содержание DFB325 Series

Отзывы:

Похожие инструкции для DFB325 Series

Бренды по названию

Популярные бренды