50
TROUBLESHOOTING
Operation
LE
Motor trouble
• Call for service if the same problem occurs again.
NE
Vario motor trouble
• Call for service if the same problem occurs again.
Symptoms
Possible Cause & Solution
Symptoms
Possible Cause & Solution
Noise
Some level of noise is normal during operation.
• Detergent cover opening.
• Drain pump at the beginning of drain cycle.
The appliance is not level.
• Adjust leveling feet.
Nozzle arm knocking against dishes.
• Reposition the dishes.
Water pressure is too high.
• Adjust water pressure.
Appliance will not
operate.
Door is not completely closed.
• Level the appliance again.
Power supply or power cord is not connected.
• Connect the power supply or cord properly.
When the Control Lock feature is activated, the display code
CL
will show
on the display.
• Deactivate the
Control Lock
button.
• Press and hold
Half Load
and
Energy Saver
simultaneously for 3 seconds
to activate or deactivate this feature.
Fuse is blown or circuit breaker tripped.
• Replace the fuse or reset the circuit breaker.
Appliance
continuously beeps
when the door is
opened, during or right
after a cycle has
completed.
The contents of the appliance are hot and care should be used when
placing your hands inside the appliance.
• Close the door until the appliance and dishes have cooled down. The
beeping will stop if the door is closed or the interior temperature has
cooled.
Содержание DFB325 Series
Страница 3: ...TROUBLESHOOTING Before Calling for Service 49 ...
Страница 55: ...Memo ...
Страница 56: ......