LNB Frequency
Select one value from 9750/10600, 9750/10750, 9750, 10600, 10750, 11300, 5150,
MDU1, MDU2, MDU3, MDU4, MDU5. If you select 9750/10600, 9750/10750(MHz),
22kHz Tone
is disabled. If you cannot find the LNB frequency value from the list,
select User and manually enter the frequency.
Some models may not be supported.
Transponder
Select the transponder you want to tune.
22kHz Tone
When using 22kHz Tone switch, select 22kHz or 0 Hz. If you use
22kHz Tone
,
Unicable and Motor Type are disabled.
LNB Power
To enable the power supply for the LNB, select
On
. If you select
Off
,
Motor Type
is
disabled.
DiSEqC
When using DiSEqC, select one option from A~D/ToneA~B. If you use
DiSEqC
,
Unicable and Motor Type are disabled.
Unicable
Select On to use Unicable and set the Unicable in the
Unicable Settings
menu.
When Unicable is enabled,
22kHz Tone
,
DiSEqC
,
Motor Type
are disabled.
Motor Type
Select Motor Type to use Motor and set the Motor in the Motor Setting menu. When
Motor is enabled,
22kHz Tone
,
DiSEqC
,
Unicable
are disabled.
If you set satellite to others, you must add a transponder using Transponder Edit.
When selecting 22kHz Tone and DiSEqC, you must connect them in the same position as
displayed on the OSD.
If you delete a Satellite, all programmes stored in the Satellite are deleted.
Set Motor Setting
DiSEqC 1.2
: Control motor to change satellite dish position.
106
