ENGLISH
Installation Manual 15
Lifting method
Lifting method
•
When carrying the suspended, unit pass the ropes under the unit and use the two suspension points each at
the front and rear.
•
Always lift the unit with ropes attached at four points so that impact is not applied to the unit.
•
Attach the ropes to the unit at an angle of 40
°
or less.
40
°
or less
Rope supporter
A
B
Sub line
CAUTION
Be very careful while carrying the product.
•
Do not have only one person carry product if it is more than 20kg.
•
PP bands are used to pack some products. Do not use them as a mean for transportation because they
are dangerous.
•
Do not touch heat exchanger fins with your bare hands. Otherwise you may get a cut in your hands.
•
Tear plastic packaging bag and scrap it so that children cannot play with it. Otherwise plastic packaging
bag may suffocate children to death.
•
When carrying in Outside Unit, be sure to support it at four points. Carrying in and lifting with 3-point
support may make Outside Unit unstable, resulting in a fall.
•
Use 2 belts of at least 8 m long.
•
Place extra cloth or boards in the locations where the casing comes in contact with the sling to prevent
damage.
•
Hoist the unit making sure it is being lifted at its center of gravity.
