LG ARUN50LL2 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 59

background image

Safety Precautions

6

Outdoor Unit

Be very careful about product transportation.

• Only one person should not carry the product if it weighs more than 20 kg.
• Some products use PP bands for packaging. Do not use any PP bands for a means of transportation.

It is dangerous.

• Do not touch the heat exchanger fins. Doing so may cut your fingers.
• When transporting the Outdoor Unit, suspending it at the specified positions on the unit base. Also

support the Outdoor Unit at four points so that it cannot slip sideways.

Safely dispose of the packing materials.

• Packing materials, such as mails and other metal

or wooden parts, may cause stabs or other injuries.

• Tear apart and throw away plastic packaging bags

so that children will not play with them. If children
play with a plastic bag which was not torn apart,
they face the risk of suffocation.

Turn on the power at least 6 hours before
starting operation.

• Starting operation immediately after turning on

the main power switch can result in severe
damage to internal parts. Keep the power switch
turned on during the operational season.

Do not touch any of the refrigerant piping
during and after operation.

• It can cause a burn or frostbite.

Do not operate the air conditioner with the
panels and guards removed.

• Rotating, hot, or high-voltage parts can cause

injuries.

Do not directly turn off the main power
switch after stopping operation.

• Wait at least more than 5 minutes before turning

off the main power switch. Otherwise it may
result in water leakage or other problems.

Auto-addressing should be done in condition of
connecting the power of all indoor and outdoour
units. Auto-addressing should also be done in
case of changing the Indoor Unit board(PCB).

Use a firm stool or ladder when cleaning or
maintaining the air conditioner.

• Be careful and avoid personal injury.

Do not insert hands or other objects through
the air inlet or outlet while the air conditioner
is plugged in.

• There are sharp and moving parts that could

cause personal injury.

Install and insulate the drain hose to ensure
that water is drained away properly based on
the installation manual.

• A bad connection may cause water leakage.

Do not operate with "System louver" closed.

• It may cause failure of appliance or accident.

«
...
4
5
6
7
8
...
»

Содержание ARUN50LL2




























































Отзывы:

Нет отзывов

Похожие инструкции для ARUN50LL2

IND-AHC-TRF-2X2-UVC-R1-120V

Бренд: Larson Electronics Страницы: 3

Бренд: Soleus Air Страницы: 16

Бренд: Argo Страницы: 38

MWF-18CRN1-QC1G

Бренд: Akai Страницы: 40

AIR CONDITIONER SYSTEMS

Бренд: DDB Страницы: 12

Бренд: INVENTOR Страницы: 76

Бренд: Electro-Air Страницы: 15

PLMB mono 12KE-410

Бренд: Amcor Страницы: 12

Бренд: Danby Страницы: 19

Бренд: Kasanova Страницы: 32

Бренд: EAS Electric Страницы: 234

Бренд: Filtrete Страницы: 40

Бренд: Jocel Страницы: 72

Бренд: Unitary products group Страницы: 24

Бренд: Olimpia splendid Страницы: 40

Бренд: ProKlima Страницы: 148

Бренд: ELwell Страницы: 12

Бренд: Kaysun Страницы: 64

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды