10. Installation
47
MULTI V
Indoor Unit
Wall Mounted Unit (Standard)
* According to product type, model line up, sales region..etc, applicability of each chassis could be different.
CAUTION
In case that the unit is installed near the sea, the installation parts may be corroded by salt. The
installation parts (and the unit) should be taken appropriate anti-corrosion measures.
10.2 Connection of pipes and cables
10.2.1 Preparing work for installation
̰
SJ/SK chassis
1. Pull the cover at the bottom of the indoor unit. Pull the cover
ྙ˧ྚ
.
2. Remove the chassis cover from the unit.
3. Pull back the tubing holder.
4. Remove pipe port cover and positioning the tubing.
̰
SV chassis
1. Open the panel of the indoor unit.
2. Remove the chassis cover from the unit by loosing 5 screws.
3. Pull back the tubing holder.
4. Remove pipe port cover and position the piping.
SV chassis
* The feature can be changed according to type of model.
* According to product type, model line up, sales region..etc, applicability of each chassis could be different.
Left rear piping
Right rear piping
43
43
140
150
167
Unit Outline
167
Installation plate
(Unit : mm)
Right
Indoor unit back side view
Tubing holder
Downwards
Left
Backwards
ೈ
The feature can be changed according to type
of model.
