LG ABNQ18GM1T0, Руководство по установке

Страница: 26 / 38

26
INSTALLATION INSTRUCTION
ENGLISH
Installer Setting - Static Pressure Setting
This function is applied to only duct type. Setting this in other cases will cause malfunction.
TEMP
FAN
SPEED
OPER
MODE
When pressing the button and
button simultaneously for more than 3
seconds, the system will be entered into the
installer setting mode.
- After entering into the installer setting mode,
select the static pressure setting code value
by pressing the button.
* Static pressure setting code value : 06
1
Select the desired setting value with the
temperature up(
▲
), down(
▼
) button.
2
When pressing button, currently
established static pressure value will be
set up.
3
When pressing the button and
button simultaneously for more than 3
seconds after the setting has been completed,
the setting mode will be released.
- If there isn’t any button input for more than
25 seconds, the installer setting mode will
also be released.
4
OPER
MODE
OPER
MODE
Code value
*Setting value
01:V-H
02:F-H
03:V-L
04:F-L
OPER
MODE
Value
Pressure selection
Function
Zone state ESP standard value
01 V-H Variable High
02 F-H Fixed High
03 V-L Variable Low
04 F-L Fixed Low
<Static Pressure Setting Table>