8
0
ENG
ENGLISH
MAKING CONNECTIONS
SIMPLINK connection
Use the TV remote control to play and control the
AV device connected with the HDMI cable through
HDMI-CEC. Your TV only works with the devices
that support HDMI-CEC.
Connect one end of the HDMI cable to the HDMI/
DVI IN or HDMI IN terminal on the rear of the TV
and the other end to the SIMPLINK device.
In wireless external output, SIMPLINK function is
not supported.
If the connected device does not support
HDMI-CEC, the SIMPLINK feature is
unavailable.
To operate SIMPLINK, an High Speed
HDMI Cable with *CEC function should
be used. (*CEC: Consumer Electronics
Control).
NOTE
Connecting to a equipment
wirelessly
LG TVs with a Wireless Control port support the
LG Wireless Media Box, which is sold separately.
When you connect the Wireless Ready Dongle
(included with the Wireless Media Box) to the
TV, external devices can be connected to the LG
Wireless Media Box and video and audio will be
sent to the TV wirelessly.
When using the external device connected
to the Wireless Media Box, some functions
of the TV menu may not work.
NOTE
There may be interference relating to
resolution, vertical pattern, contrast or
brightness in PC mode. Change the PC
mode to another resolution or change the
refresh rate to another rate or adjust the
brightness and contrast on the menu until
the picture is clear. If the refresh rate of
the PC graphic card can not be changed,
change the PC graphic card or consult the
manufacturer of the PC graphic card.
The synchronization input waveform for
Horizontal and Vertical frequencies are
separate.
We recommend using
1920x1080, 60 Hz
for the PC mode, this should provide the
best picture quality.
Connect the signal cable from the monitor
output port of the PC to the RGB (PC) port
of the TV or the signal cable from the HDMI
output port of the PC to the HDMI IN (or
HDMI/DVI IN) port on the TV.
Connect the audio cable from the PC to the
Audio input on the TV. (Audio cables are
not included with the TV).
If using a sound card, adjust PC sound as
required.
If the graphic card on the PC does
not output analogue and digital RGB
simultaneously, connect only one of either
RGB or HDMI IN (or HDMI/DVI IN) to
display the PC output on the TV.
If the graphic card on the PC does output
analogue and digital RGB simultaneously,
set the TV to either RGB or HDMI; (the
other mode is set to Plug and Play
automatically by the TV.)
DOS mode may not work depending on the
video card if you use an HDMI to DVI cable.
If you use too long an RGB-PC cable, there
may beinterference on the screen. We
recommend using under 5m of cable. This
provides the best picture quality.
NOTE
WIRELESS
CONTROL
AUDI
O
VIDEO
L/MONO
R
RS-2
32C
IN (C
ONT
ROL
&SE
RVIC
E)
AV IN 1
LAN
RGB IN (PC)
OPTICAL DIGITAL
AUDIO OUT
PTICAL DIGIT
TICAL DIGIT
AUDIO IN
(RGB/DVI)
AUDIO IN
AUDIO IN
CABLE
IN
AB
AB
AV IN 2
AUDIO / VIDEO
COMPONENT IN 2
AUDIO / Y PB PR
H/P
ANTENNA
IN
TEN
TEN
1
HDMI OUT
WIRELESS
CONTROL
DVI
IN 1(ARC)
DVI
IN 2
DVI
IN 3
DVI
IN 4
HDD IN USB IN 1
USB Apps USB IN2