background image

31

EN

Cleaning the Lint Filter

The filter is an important part for efficient 

washing performance result, so it needs special 

care from you. It is recommended that the filter 

be cleaned regularly.

1

Pull the cap of the lint filter.

2

Open the cap and remove lint and then wash 

out.

3

Insert the lower part of the filter into the 

drum and close the cap until you hear a click 

sound.

NOTE

 

When the lint filter is damaged, contact LG 

service centre.

 

Do not operate the washing machine without 

the lint filter.

 

Do not place the lint filter loosely. Doing so may 

damage the fabrics or the washing machine.

Caution on Freezing During 

Winter

 

When frozen, the product does not operate 

normally. Make sure to install the product 

where it will not freeze during winter.

 

In case the product must be installed outside 

on a porch or in other outdoor conditions, make 

sure to check the following.

How to Keep the Product from 

Freezing

 

After closing the tap, disconnect the cold 

supply hose from the tap, and remove water 

while keeping the hose facing downwards.

Supply hose

Содержание WTP20WX


















































Отзывы: