54
EN
Symptoms
Reason
Solution
Water does not
enter washing
machine or it
enters slowly
Water supply is not adequate in
that location.
•
Check another tap in the house.
Water supply tap is not
completely open.
•
Fully open tap.
Water supply hose(s) are kinked.
•
Straighten hose.
The filter of the supply hose(s)
clogged.
•
Check the filter of the supply hose.
Water in the
washing machine
does not drain or
drains slowly
Drain hose is kinked or clogged.
•
Clean and straighten the drain hose.
The drain filter is clogged.
•
Clean the drain filter.
Washing
machine does
not start
Electrical power cord may not be
plugged in or connection may be
loose.
•
Make sure plug fits tightly in wall outlet.
House fuse blown, circuit
breaker tripped,or a power
outage has occurred.
•
Reset circuit breaker or replace fuse. Do
not increase fuse capacity. If problem is
a circuit overload, have it corrected by a
qualified electrician.
Water supply tap is not turned
on.
•
Turn on water supply tap.
Washing
machine will not
spin
Check that the door is firmly
shut.
•
Close the door and press the
Start/Pause
button. After pressing the
Start/Pause
button, it may take a few moments before
the washing machine begins to spin. The
door must be locked before spin can be
achieved. Add 1 or 2 similar items to help
balance the load. Rearrange load to allow
proper spinning.
