ARIA SOHO Hardware Description and Installation Manual
Issue 1
STARTING THE ARIA SOHO
Aug, 2006
58
6.2.3.4 Numbering Plan Type (PGM 104)
To program the Numbering Plan Type, perform the following:
1. Press the [TRANS/PGM] 104.
2. Enter the Numbering Plan Type (1 digit, refer to Table).
3. Press the [HOLD/SAVE] button to accept changes.
NUMBERING PLAN TYPE
NUMBER SET TYPE/
PRESS #
INTERCOM RANGE
DEFAULT
REMARK
1 100-151
Yes
As the basic type, the 1
st
digit of the Station
number should be 1-4.
2
100-151
No
The Station number can be changed up to 799.
3 100-151
No
4 700-751
No
5 200-251
No
6 10-61
No
7 100-151
No
8
100-151
No
The Station number can be changed up to 999.
6.2.3.5 Flexible Numbering Plan (PGM 105)
To set the Flexible Numbering Plan, perform the following Steps:
1. Press the [TRANS/PGM] 105.
2. Enter the Station Range (dial the Start and End numbers as described in the Table).
3. Press the [HOLD/SAVE] button to accept changes.
NUMBERING PLAN DETAIL
STATION NUMBERS
DESCRIPTION
000 001 002 003
100 101 102 103
[TRANS/PGM]
+ 105
000 001 002 003
100 101 102 103
Station Number Assign—Four station numbers correspond to the 4 port numbers. The
Station number length is in the range of 2 digits through 4 digits. There are two
methods for changing the station number:
Dial two station numbers – Dial the range of the start and end Station numbers. The
LCD will show the dialed range value. Press the
[HOLD/SAVE]
button to accept
change. All LEDs of BTNs will be extinguished.
Press one of FLEX 1-4 - Each FLEX button (1-4) is assigned to a corresponding
Station number (1- 4) on the current LCD. The LED of the pressed Flexible button will
show steady light. Dial the new Station number and press the
[HOLD/SAVE]
button to
accept change, or press another Flexible button to assign a Station number to other
stations without saving.
To change the next 4 station numbers then press [
▼
] button. If you want to change
previous 4 station numbers, then press [
▲
] button.
To delete all Station numbers, press the
[SPEED]
button and press the
[HOLD/SAVE]
button; all station numbers will be cleared.
000 001 002 003
100 400 102 103
Press the
[HOLD/SAVE]
button to save changes to the database permanently (Ex:
Press FLEX 2, dial 400 and press
[HOLD/SAVE]
button).
