ARIA SOHO Hardware Description and Installation Manual
Issue 1
BOARD INSTALLATION
Aug, 2006
25
4
B
B
O
O
A
A
R
R
D
D
I
I
N
N
S
S
T
T
A
A
L
L
L
L
A
A
T
T
I
I
O
O
N
N
4.1 Installation of the Boards
Prior to installing the Boards, the following should be considered:
CAUTION
Power must be turned OFF.
To protect the System from static electricity, do not touch the boards. To discharge static, touch a
grounded object, or wear a grounding strap.
Insert boards carefully to avoid bending connector pins (male pins on MBU/EMBU) and board
damage from power shortage caused by misaligning.
For hybrid port on MBU/EMBU/CHB308, DKT and SLT do not support at the same time. DKT
has a priority.
To install the Board, perform the following Steps:
1. Before inserting the Board, remove the dummy slot as shown in #1 of Figure 4.1.
2. Holding the board as shown in #2 of the diagram, carefully insert the Board in the direction of the
arrow so that the Board securely engages with the connector (CN2) on the main board (#3).
FIGURE 4.1 BOARD INSTALLATION
