LEYBOLD 230110, Инструкция по эксплуатации

Страница: 19 / 56

GA130001441_002_C0
– 09/2016
19
5.2.3 Benchtop Instrument
When intending to use the COMBIVAC CM 51 as a benchtop instrument, then proceed as
follows:

Push one of the two edge protection rubber pieces included in the delivery over the top
edge of the front panel (

Figure 5, page 19)

Place the COMBIVAC CM 51 on its back (

Figure 6, page 19)

Push the second edge protection rubber piece included in the delivery onto the bottom
edge of the front panel
WARNING: Risk of suffering injury.
When using the COMBIVAC CM 51 as a benchtop instrument fit the two edge
protection rubber pieces onto the top and bottom edge of the front panel so
as to avoid injury by sharp edges.

Stick the two rubber feet included in the delivery onto the bottom of the housing.
Figure 5
– Preparing the top side of the instrument
for utilisation as a benchtop unit
Figure 6
– Preparing the bottom side of the
instrument for utilisation as a benchtop
unit

Turn the COMBIVAC CM 51 over again and move it to the desired place.