GA130001441_002_C0
– 09/2016
13
4.1.2
Standard Parameters (factory defaults)
4.1.2.1 Sensor-dependent Parameters
Parameter
Parameter description
THERMOVAC
setting
PENNINGVAC
setting
Switching thresold 1
– lower threshold
.
.
Switching thresold 1
– upper threshold
.
.
Switching thresold 2
– lower threshold
.
.
Switching thresold 2
– upper threshold
.
.
Table 3
–
Switching parameters, factory defaults
Parameter
Parameter description
THERMOVAC
setting
PENNINGVAC
setting
THERMOVAC filament material
(tungsten)
-
THERMOVAC gas type correction characteristic
(nitrogen)
-
PENNINGVAC gas type correction factor
-
.
Switch-on type for sensor
-
Switch-off type for sensor
-
Table 4
–
Sensor parameters, factory defaults
4.1.2.2 General Parameters
Parameter
Parameter description
Setting
Displayed unit of measurement
Analog output
(CM 51)
Number of displayed digits
Display brightness
Profibus address
Baud rate
.
Serial interface
Table 5
–
General parameters, factory defaults
4.1.3
Environment
Temperature:
Storage:
-20
– +60 °C
Operating: +5
– +50 °C (sea level)
+5
– +30 °C (2000 m above sea level)
Relative atmospheric humidity: 80 % max. (up to 30 °C)
decreasing to 50 % max. (over 40 °C)
Use:
indoors (altitude 2000 m max. above sea level)
Ingress protection type:
IP40
