manualshive.com logo in svg

LEYBOLD 11375, Инструкция по установке и эксплуатации

Поделиться
Скачать
LEYBOLD 11375 Скачать руководство пользователя страница 40

Maintenance

  40

GA03108_002_C1 - 04/2018 - © Leybold

5 Maintenance

5.1  Safety Information

The safety information given in the following applies to all maintenance work.

Notice safety information 0.1 to 0.3.

Disconnect the electrical power before disassembling the pump. Make 
absolutely sure that the pump cannot be accidentally started (logout/
tagout).

If the pump has been pumping harmful substances, determine the nature 
of hazard and introduce suitable safety measures. Observe all safety regu-
lations !

When shipping contaminated pumps which require approval by the autho-
rities, you must observe the applicable packaging and shipping regulations.

All maintenance and cleaning work described in this section must be car-
ried out only by suitably trained personnel.

Improper maintenance or repairs may affect the service life and perfor-
mance of the pump, and cause problems when filing warranty claims.

Advanced repair work not described here should be left to the Leybold 
service.

We would like to point out that Leybold offers training courses on the mainte-
nance, repair, and troubleshooting of RUVAC pumps. Further details are 
available on request.

WARNING

Fig. 5.1  Changing the lubricant

1  Oil-drain plug 

for horizontal flow

2  Oil-drain plug 

for vertical flow

3  Oil-level glass
4  Oil-fill plug

1

2

3

4

Содержание 11375





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды