manualshive.com logo in svg

LEYBOLD 1019040V00, Руководство по эксплуатации

Поделиться
Скачать
LEYBOLD 1019040V00 Скачать руководство пользователя страница 26

5.1.3  Lift the pump

WARNING: SUSPENDED LOAD

Risk of physical injury. Due to the pump weight, use only a suitable lifting device to lift
the pump at the lifting lug (CE regulations). Lifting facilities are the only recommended
way of handling the pump. Do not lift at the motor, cables connection boxes, flanges
etc. Do not drag the pump from these points.

When you connect or remove the pump, do not move under hoisted loads. Fasten
eye bolts only hand-tight. Eye bolts must be screwed in properly with full contact to
the pump surface. Mounted eye bolts are only suitable for lifting the respective pump.
They must not be used for other loads. Eye bolts must only be used in accordance
with the conforming utilisations. Use eye bolts only with appropriate lifting devices.

Pumps that are filled with oil must only be moved while standing upright.
Otherwise, the oil may escape. Avoid any other orientations while lifting.

The connection ports are blanked off by a blank flange.

Take the blank flange away before switching on the pump.

The pumps have their oil filled in.

300956027_002_A0 - 03/2022 - © Leybold

26

Transportation

Содержание 1019040V00

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды