LEXUS
GX470
2007 -
XM SATELLITE RADIO TUNER
Procedure
Page 17 of 30 pages
Issue: D 11/18/08
(4) Remove the audio harnesses (12P) from
the audio head unit and connect the tuner
cable (Fig. 4-2).
(5) Connect the tuner cable to the audio head
unit (Fig. 4-2).
NOTE:
The illustration shows a vehicle
equipped with EMV, but the procedure is the
same for standard audio.
(6) Wrap cushion tape around the connector
connection position (Fig. 4-3).
(7) Re-Install the audio head unit.
(b) Lay the cable from the bottom of the steering
column through to the cowl side
(1) Secure it to the duct shown in the
illustration with ½ cushion tape (Fig. 4-4).
(2) Using scissors cut one 50mm x 100mm
cushion tape in half to make two 50mm
x 50mm cushion tapes (Fig 4-4).
(3) Fasten the cable to the indicated harness
with tie wraps (Fig. 4-4).
(4) Use a side cutter to cut off the excess tie
wrap length.
(c) Wiring behind the front scuff plate
(1) Lay the cable along the harnesses shown
in the illustration (Fig. 4-5).
Fig. 4-2
Tuner Cable
12P
Cushion Tape
(50mm
100mm)
Fig. 4-3
Fig. 4-4
Side Cutter, Scissors
Tuner Cable
Tie Wraps
(
4)
Cushion Tape
Fig. 4-5
Tuner Cable
Pass it through the harness guide.
Front
(cut to 50mm
50 mm)
