LEXUS
GX470
2007 -
XM SATELLITE RADIO TUNER
Procedure
Page 15 of 30 pages
Issue: D 11/18/08
(h) Use tie wraps to fasten the antenna cable to
the harness shown in the diagram (Fig. 3-10).
(i) Use a side cutter to cut off the excess tie
wrap length.
(j) Attach a housing to the antenna cable
terminal.
(1) Remove the anti-static polyurethane
cover from the terminal (Fig. 3-11).
(2) If the lock plate of the housing is pushed
in, pull it out (Fig. 3-12).
NOTE:
This step is not required if the
lock plate is already pulled out.
(3) Push the terminal into the housing (Fig.
3-13).
Antenna Cable Terminal
Anti-Static Polyurethane Bag
Fig. 3-11
Lock Plate
(When pushed in)
OK
NG
Lock Plate
(When pulled out by around 1mm)
Insert a slim screwdriver
into the notch and lift up.
Fig. 3-12
Fig. 3-13
Insert the guides on the terminal
into the slits in the housing.
Housing
Antenna Cable
Push in until it clicks.
Fig. 3-10
Side Cutter
Tie Wraps (
2)
Antenna Cable
Front
