Lexmark Optra T522, Руководство пользователя

Страница: 205 / 215

203
Safety information
•
If your product is NOT marked with this symbol , it MUST be connected to an electrical
outlet that is properly grounded.
•
The power cord must be connected to an electrical outlet that is near the product and easily
accessible.
•
Refer service or repairs, other than those described in the operating instructions, to a
professional service person.
•
This product is designed, tested and approved to meet strict global safety standards with the
use of specific Lexmark components. The safety features of some parts may not always be
obvious. Lexmark is not responsible for the use of other replacement parts.
•
Your product uses a laser, exercise
CAUTION:
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
•
Your product uses a printing process that heats the print media, and the heat may cause the
media to release emissions. You must understand the section in your operating instructions
that discusses the guidelines for selecting print media to avoid the possibility of harmful
emissions.
Cautions and warnings
CAUTION:
A caution identifies something that might cause you harm.
W
ARNING
:
A warning identifies something that might damage your printer hardware or
software.
Electronic emission notices
With a network cable attached
Federal Communications Commission (FCC) Compliance Information Statement
The Lexmark T522 has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The FCC Class A limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user will be required to correct
the interference at his own expense.