Lexmark MX320 Series Скачать руководство пользователя страница 144 | Manualshive

Страница: 144 / 146

background image

Radio interference notice

Warning

This is a product that complies with the emission requirements of EN55022 and EN55032 Class A limits and
immunity requirements of EN55024. This product is not intended to be used in residential/domestic
environments.

This is a Class A product. In a domestic environment, this product may cause radio interference, in which case
the user may be required to take adequate measures.

Class B products

Product name

Machine type Model

B2338dn, B2338dw, B2442dn, B2442dw, B2546dn, B2650dn,
M1242, M1246, MS321dn, MS421dn, MS421dw, MS521dn,
MS621dn, MS621dtn

4600

230, 238, 430, 438, 490, 630, 690,
830

C4150, CS720de, CS720dte, CS725de, CS725dte, CS727de,
CS728de

5028

135, 630, 639

CX725de, CX725dhe, CX725dthe, CX727de, XC4140, XC4150 7528

196, 576, 578, 598

MB2338adn, MB2338adw, MB2338dw, MB2442ade,
MB2442adwe, MX321adn, MX321adw, MX421ade, XM1238,
XM1242

7017

238, 276, 278, 296, 476, 478, 496

Federal Communications Commission (FCC) compliance information

statement

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.

The FCC Class B limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult your point of purchase or service representative for additional suggestions.

The manufacturer is not responsible for radio or television interference caused by using other than
recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes
or modifications could void the user's authority to operate this equipment.

Lexmark Confidential until announced

Regulatory information

27

«
...
142
143
144
145
146
»

Содержание MX320 Series



















































































































































Отзывы:

Нет отзывов

Похожие инструкции для MX320 Series

Бренд: NCR Страницы: 36

Бренд: NCR Страницы: 206

Бренд: NCR Страницы: 138

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 9

Бренд: Panasonic Страницы: 2

Бренд: Datecs Страницы: 73

Бренд: Datamax Страницы: 12

E-Class Mark II

Бренд: Datamax Страницы: 40

Бренд: Datamax Страницы: 46

Бренд: Xerox Страницы: 2

Бренд: Xerox Страницы: 11

Бренд: Xerox Страницы: 192

Бренд: Xerox Страницы: 10

Бренд: Xerox Страницы: 15

WORKCENTRE 7425

Бренд: Xerox Страницы: 88

Бренд: Xerox Страницы: 10

Бренд: Xerox Страницы: 33

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды