Ordering a photoconductor kit
Depending on your printer model, the printer issues a message or a light sequence to let you know the
photoconductor kit is near its end of life. At this time, order a photoconductor kit. You can also see the status of the
photoconductor kit by printing a network setup page.
Part name
Part number
Photoconductor kit
E260X22G
Replacing supplies
Replacing the toner cartridge
Light sequence
Toner is low
•
- On
•
- On
When the “Toner is low” light sequence appears, or when you experience faded print, remove the toner cartridge.
Firmly shake it side-to-side and front-to-back several times to redistribute the toner, and then reinsert it and continue
printing. When shaking the cartridge no longer improves the print quality, replace the toner cartridge.
Note:
You can check to see approximately how much toner is left in your cartridge by printing a menu settings page.
To replace the toner cartridge:
1
Open the front door by pressing the button on the left side of the printer and lowering the door.
Maintaining the printer
102