Sample RFID settings and their behaviors
For more information on RFID settings, see
“Understanding the RFID settings” on page 15
Settings
Behaviors
Stop on Error = NO
Retry = 0
Mark on Error = NO
•
Prints a bad
‑
tag page without
.
•
Prints the in
‑
flight pages, and then terminates the remaining jobs.
Stop on Error = NO
Retry = 1 or more
Mark on Error = NO
•
Prints a bad
‑
tag page without
.
•
Reprints the bad
‑
tag page.
Note:
The reprinted page may not follow the bad
‑
tag page immediately.
Stop on Error = NO
Retry = 1 or more
Mark on Error = YES*
•
Prints a bad
‑
tag page with
.
•
Reprints the bad
‑
tag page.
Note:
The reprinted page may not follow the bad
‑
tag page immediately.
Stop on Error = YES
Retry = 0
Mark on Error = NO
•
Does not print a bad
‑
tag page.
•
If a bad tag is detected, the printer prints all in
‑
flight pages, the printer stops, and then
shows error 44.01.
–
Selecting
Continue
reprints the bad
‑
tag page. The reprinted page may not follow the
bad
‑
tag page immediately.
–
Selecting
Cancel
terminates the job.
Stop on Error = YES
Retry = 1 or more
Mark on Error = NO
•
Prints a bad
‑
tag page without
.
•
Reprints the bag
‑
tag page. Prints the remaining jobs when a retry is successful.
Note:
The reprinted page may not follow the bad
‑
tag page immediately.
•
If a retry is unsuccessful, then the printer stops and shows error 44.01.
–
Selecting
Continue
reprints the bad
‑
tag page, and then prints the remaining jobs.
–
Selecting
Cancel
terminates the job.
Stop on Error = YES
Retry = 1 or more
Mark on Error = YES*
•
Prints a bad
‑
tag page with
.
•
Reprints the bad
‑
tag page after printing the in
‑
flight pages, and then prints the remaining
jobs.
•
If a retry is unsuccessful, then the printer stops and shows error 44.01.
–
Selecting
Continue
reprints the bad
‑
tag page, and then prints the remaining jobs.
–
Selecting
Cancel
terminates the job.
* If Mark on Error is set to YES, then the print speed is reduced significantly.
Configuring the solution
16
