Setting up and using the home screen
applications
Customizing the home screen
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click
Settings
>
Device
>
Visible Home Screen Icons
.
3
Select the icons that you want to appear on the home screen.
4
Apply the changes.
Using Display Customization
Changing the wallpaper
1
From the home screen, touch
Change Wallpaper
.
2
Select an image to use.
3
Apply the changes.
Creating a slide show
Before you begin, make sure to configure the slide show settings. For more information, see the documentation
that came with the solution.
1
Insert a flash drive into the USB port.
2
From the home screen, touch
Slideshow
.
Note:
Images appear in alphabetical order.
Configuring Eco
‑
Settings
1
From the home screen, touch
Eco
‑
Settings
.
2
Configure the Eco
‑
Mode settings or schedule a power-saving mode.
3
Apply the changes.
Setting up and using the home screen applications
18
Содержание CS921
