Lexmark CS720 Series Скачать руководство пользователя страница 101

Страница: 101 / 138

Action

Yes

Remove, and then reinstall the imaging unit or imaging kit.

Warning—Potential Damage:

Do not expose the imaging unit

or imaging kit to direct light for more than 10 minutes.
Extended exposure to light may cause print quality problems.

Warning—Potential Damage:

To avoid damage, do not touch

the underside of the imaging unit or imaging kit.

Resend the print job.

Do vertical white lines still appear on prints?

Contact

customer

support

The problem is
solved.

The printer is not responding

Action

Yes

Step 1

Connect the power cord to the electrical outlet.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or

electrical shock, connect the power cord to an appropriately
rated and properly grounded electrical outlet that is near the
product and easily accessible.

Is the printer responding?

The problem is
solved.

Go to step 2.

Step 2

Check if the electrical outlet is turned off by a switch or breaker.

Is the electrical outlet turned off by a switch or breaker?

Turn on the switch or
reset the breaker.

Go to step 3.

Step 3

Check if the printer is on.

Is the printer on?

Go to step 4.

Turn on the printer.

Step 4

Check if the printer is in sleep or hibernate mode.

Is the printer in sleep or hibernate mode?

Press the power
button to wake the
printer.

Go to step 5.

Step 5

Check if the cables connecting the printer and the computer are
inserted in the correct ports.

Are the cables inserted in the correct ports?

Go to step 6.

Make sure to match
the following:

•

The USB cable
with the USB port
on the printer

•

The Ethernet
cable with the
Ethernet port on
the printer

Troubleshooting

101

Содержание CS720 Series











































































































































Результаты поиска

Содержание CS720 Series

Отзывы:

Похожие инструкции для CS720 Series

Бренды по названию

Популярные бренды

Lexmark CS720 Series, Руководство пользователя

Результаты поиска

Содержание CS720 Series

Отзывы:

Похожие инструкции для CS720 Series

Бренды по названию

Популярные бренды