Overview of the Lexmark E120n operator panel
41
Using the operator panels
Resource save off
Short paper
Light sequence:
•
Continue—On
•
Error—On
Secondary light sequence:
Press
twice quickly to see the secondary light
sequence.
•
Continue—On
•
Ready / Data—Blinking
•
Error—On
Message:
Too much memory has been allocated to the print buffer.
Solution:
•
Press
to clear message and continue printing.
•
Change the print buffer to a lesser amount, or set the print buffer to Auto (see Using the printer
resident Web page on page 43).
Light sequence:
•
Continue—On
•
Error—On
Secondary light sequence:
Press
twice quickly to see the secondary light
sequence.
•
Continue—On
•
Ready / Data—On
•
Load / Remove Paper—On
•
Error—On
Message:
Paper length is too short to print the formatted data. This occurs when the printer does not know the loaded media
size or when there is a problem feeding the media.
Solution:
•
Make sure the loaded print media is large enough and paper size is set correctly in the Local Printer
Setup Utility paper size menu (see Software and Documentation CD).
•
Press
to clear message and continue the job.
•
Press
to cancel print job.
Primary light
sequence
Secondary light
sequence
Primary light
sequence
Secondary light
sequence
