Overview of the Lexmark E120n operator panel
37
Using the operator panels
Print side two of a duplex job
Memory full
Light sequence:
•
Continue—Blinking
•
Load / Remove Paper—On
Message:
Print the other side of current duplex print job.
Solution:
•
Insert print job into priority feeder using instructions in the driver pop-up menu to orient pages correctly,
then press
to resume printing.
•
Press
to cancel print job.
•
Press and hold
to reset printer.
Light sequence:
•
Continue—On
•
Error—On
Secondary light sequence:
Press
twice quickly to see the secondary light
sequence.
•
Continue—On
•
Ready / Data—On
•
Toner Low/Replace PC Kit—On
•
Error—On
Message:
Printer is processing data, but the memory used to store pages is full.
Solution:
•
Press
to clear message and continue printing job (may not print correctly).
•
Press and release
to cancel print job.
•
Press and hold
to reset printer (may need to send the print job again).
•
To avoid this error in the future: Simplify print job. Reduce complexity of the page by reducing the amount
of text or graphics and deleting unnecessary fonts or macros.
Primary light
sequence
Secondary light
sequence
