Overview of the Lexmark E120n operator panel
34
Using the operator panels
Complex page
Missing cartridge / Defective cartridge detected
Light sequence:
•
Continue—On
•
Error—On
Secondary light sequence:
Press
twice quickly to see the secondary light
sequence.
•
Continue—On
•
Ready / Data—On
•
Error—On
Message:
The page may not print correctly because the print information on the page is too complex (that is, too large for the
printer memory).
Solution:
•
Press
to clear message and continue processing the job (some print data may be lost).
•
To avoid this error in the future:
–
Reduce complexity of the page by reducing the amount of text or graphics.
–
Set Page Protect to On in the Local Printer Setup Utility (see Software and Documentation CD).
Light sequence:
•
Toner Low/Replace PC Kit—Blinking
•
Error—On
Secondary light sequence:
Press
twice quickly to see the secondary light sequence.
•
Toner Low/Replace PC Kit—On
•
Error—On
•
Paper Jam—Blinking
Message:
Either the toner cartridge is missing, the long-life photoconductor kit is missing, or a defective toner cartridge is
detected.
Solution:
First, check to see if a toner cartridge is installed. If the toner cartridge is properly installed, check to see if a long-
life photoconductor kit is installed. If both are properly installed, then remove the defective toner cartridge. If the
toner cartridge or the long-life photoconductor kit is missing, install the missing item.
Primary light
sequence
Secondary light
sequence
Primary light
sequence
Secondary light
sequence