22
48D0586
LOG PLACEMENT
INSTALLING LOGS AND ROCK WOOL (EMBER MATERIAL) IN FIREBOX
1. Open front door of firebox.
2. Carefully remove seven (7) logs from wrapping.
3. Place rear log (#1)
centered
against back of firebox.
See Figure 22.
4. Line up the holes in the bottom of the left base log (#2) with pins on the left side of insert. Install left base log.
See
Figure 23.
Before you begin
— This unit is supplied with seven (7) ceramic fiber logs. Do not handle these logs with your bare hands.
Always wear gloves to prevent skin irritation from ceramic fibers.
After handling the logs, wash your hands gently with
soap and water to remove any traces of fibers.
The positioning of the logs is critical to the safe and clean operation of this heater.
Sooting and other problems may result if the logs are not properly and firmly positioned
in the appliance. Never add additional logs or embellishments such as pine cones or
vermiculite to the heater. Only use the logs supplied with the unit.
Failure to position the parts in accordance with diagrams below or to use only parts
specifically approved for this heater may result in property damage or personal
injury.
W
A
R
N
IN
G
Figure 22 - Installing Rear Log #1
Figure 23 - Installing Left Log #2
Rear Log (#1)
Left Front
Log (#2)
Pins
Содержание ASHTON AI31DVC
Страница 38: ...38 48D0586 REPLACEMENT PARTS 6...
Страница 42: ...42 48D0586 NOTES...
Страница 43: ...48D0586 43 NOTES...
