LEXIBOOK CHESSMAN LIGHT, Инструкции по эксплуатации

Страница: 14 / 51

14
Setting L6.
This setting works in the same way as setting L3 but the display of the computer’s move stops the timer to
allow the player the time to move the piece without being penalised.
9.3) Selecting levels and settings.
When you turn the chess computer on for the first time with the timer connected, the game automatically
starts on level 1 and in game setting L3. After that, it will save the level and setting when you turn it off
and when you press NEW GAME.
To change the level or setting, follow these instructions:
1. Press the LEVEL key on the computer to go to level selection. The computer will illuminate the light
corresponding to the current level (for example, square A6 corresponds to level 1, setting L3, square G6
corresponds to level 1, setting L6).
2. Consult the table above to find out the square corresponding to the level and setting you want. Press
this square.
3. Press the LEVEL key again to exit level selection. Then begin playing with your first move, or press
MOVE to let the computer go first.
If you want to check which level and setting is selected without changing them, follow this procedure:
1. Press the LEVEL key. The computer will show the current level by illuminating the lights of the square
corresponding to the level and the timer shows the game setting.
2. Press LEVEL a second time to return to the game.
You can change or verify the level at any moment of the game when it’s your turn to move.
LEVEL
1
2
3
4
5
6
7
8
RESPONSE
TIME/MOVE
5 seconds
10 seconds
30 seconds
1 minute
3 minutes
10 minutes
30 minutes
2 hours A6 C6 E6 G6
A7 C7 E7 G7
A8 C8 E8 G8
B1 D1 F1 H1
B2 D2 F2 H2
B3 D3 F3 H3
B4 D4 F4 H4
B5 D5 F5 H5
L3 L4 L5 L6
SETTING
LEVEL
RESPONSE
TIME/MOVE
SETTING
L1 L2
0
MULTI
MOVE
B8 D8
CG2400 •• A6 11/03/02, 17:30 14