Leviton Opt-X 5WMED-04C, Инструкция по эксплуатации

Страница: 8 / 12

Page 8 of 11
PK-A3188-10-00-0B
ROUTING FOR FIELD TERMINATED CABLING – FAN OUT
ROUTING FOR SPLICE TERMINATION
When performing splice terminations, it is recommended to pre-route and mark trunk and pigtail cabling prior to per-
forming any trimming, termination or routing. Splice work can then be performed outside of the enclosure at the termi-
nation equipment. When routing terminated assemblies, route in the trunk cabling (solid line in Figure 8) first, followed
by the pigtail assemblies (dotted line in Figure 8). To maintain future accessibility, keep each set of cabling (trunk and
pigtail respectively) routed separately through the Wire Management saddles.
ROUTING FOR PRE-TERMINATED CABLING – CASSETTES
Figure 6
Figure 7