User Guide
Page 18
System Status Check
Make your final power connections and apply power.
At this point in time, your NPC should be operational. There’s a bit
of configuration which must still be done, but all your connections
are made. To checkout the system, observe the LED’s on the front
of the unit.
Figure 11: Successful Status of LED
Lit LED indicates
power OK.
Luma-Net active LED
lit indicates Luma-Net
OK. (Or Sapphire-Net)
DMX active LED's only lit when
actually transmitting or receiving DMX
data (subject to configuration).
Flashing LED indicates active
data on network.
