manualshive.com logo in svg

LevelOne GTL-2881, Руководство пользователя

"LevelOne GTL-2881" - это мощный гигабитный коммутатор с 8 портами. Для того чтобы ознакомиться с функционалом устройства, вы можете загрузить бесплатное Руководство пользователя с нашего сайта. Наслаждайтесь превосходным качеством с LevelOne GTL-2881! Скачайте руководство на manualshive.com.

Поделиться
Скачать
background image

Chapter 15

  |  IP Configuration

Setting the Switch’s IP Address (IP Version 6)

–  615  –

Reassembled Succeeded

The number of IPv6 datagrams successfully reassembled. Note that this 
counter is incremented at the interface to which these datagrams were 
addressed which might not be necessarily the input interface for some 
of the fragments.

Reassembled Failed

The number of failures detected by the IPv6 re-assembly algorithm (for 
whatever reason: timed out, errors, etc.). Note that this is not necessarily 
a count of discarded IPv6 fragments since some algorithms (notably 
the algorithm in RFC 815) can lose track of the number of fragments by 
combining them as they are received. This counter is incremented at 
the interface to which these fragments were addressed which might 
not be necessarily the input interface for some of the fragments.

IPv6 Transmitted

Forwards Datagrams

The number of output datagrams which this entity received and 
forwarded to their final destinations. In entities which do not act as IPv6 
routers, this counter will include only those packets which were Source-
Routed via this entity, and the Source-Route processing was successful. 
Note that for a successfully forwarded datagram the counter of the 
outgoing interface is incremented.

Requests

The total number of IPv6 datagrams which local IPv6 user-protocols 
(including ICMP) supplied to IPv6 in requests for transmission. Note 
that this counter does not include any datagrams counted in 
ipv6IfStatsOutForwDatagrams.

Discards

The number of output IPv6 datagrams for which no problem was 
encountered to prevent their transmission to their destination, but 
which were discarded (e.g., for lack of buffer space). Note that this 
counter would include datagrams counted in 
ipv6IfStatsOutForwDatagrams if any such packets met this 
(discretionary) discard criterion.

No Routes

The number of input datagrams discarded because no route could be 
found to transmit them to their destination.

Generated Fragments

The number of output datagram fragments that have been generated 
as a result of fragmentation at this output interface.

Fragment Succeeded

The number of IPv6 datagrams that have been successfully fragmented 
at this output interface.

Fragment Failed

The number of IPv6 datagrams that have been discarded because they 
needed to be fragmented at this output interface but could not be.

ICMPv6 Statistics

ICMPv6 received

Input

The total number of ICMP messages received by the interface which 
includes all those counted by ipv6IfIcmpInErrors. Note that this 
interface is the interface to which the ICMP messages were addressed 
which may not be necessarily the input interface for the messages.

Errors

The number of ICMP messages which the interface received but 
determined as having ICMP-specific errors (bad ICMP checksums, bad 
length, etc.).

Destination Unreachable 
Messages

The number of ICMP Destination Unreachable messages received by 
the interface.

Packet Too Big Messages

The number of ICMP Packet Too Big messages received by the interface.

Time Exceeded Messages

The number of ICMP Time Exceeded messages received by the 
interface.

Table 37: Show IPv6 Statistics - display description 

(Continued)

 

Field

Description

Содержание GTL-2881



































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для GTL-2881

jablotron UC-230 Quick Start Manual preview
UC-230
Бренд: jablotron Страницы: 2
Valcom V-2972 User Manual preview
V-2972
Бренд: Valcom Страницы: 2
Cabletron Systems MMAC-Plus 9H423-26 Supplementary Manual preview
MMAC-Plus 9H423-26
Бренд: Cabletron Systems Страницы: 14
3Com Gigabit Switch 8 Specifications preview
Gigabit Switch 8
Бренд: 3Com Страницы: 2
Ultra GammaView 2555 User Manual preview
GammaView 2555
Бренд: Ultra Страницы: 20
Datavideo SE-2200 Instruction Manual preview
SE-2200
Бренд: Datavideo Страницы: 38
NETGEAR M4200 Series Installation Manual preview
M4200 Series
Бренд: NETGEAR Страницы: 2
Cabletron Systems 9F426-03 Appendix preview
9F426-03
Бренд: Cabletron Systems Страницы: 14
H3C S6826 Series Installation Manual preview
S6826 Series
Бренд: H3C Страницы: 57
Avid Technology MEDIAswitch Manual preview
MEDIAswitch
Бренд: Avid Technology Страницы: 34
ALFAtron ALF- WUK3A Manual preview
ALF- WUK3A
Бренд: ALFAtron Страницы: 15
Leonton EG2-1600 Series User Manual preview
EG2-1600 Series
Бренд: Leonton Страницы: 19
AMX AVS-OCT-3264-360 Product View preview
AVS-OCT-3264-360
Бренд: AMX Страницы: 1
Nxg VCH8 Owner'S Manual preview
VCH8
Бренд: Nxg Страницы: 2
HB Products HBSC2-SSR Instruction Manual preview
HBSC2-SSR
Бренд: HB Products Страницы: 6
Dahua D-PFS3110-8ET1GT1GF-96 Quick Start Manual preview
D-PFS3110-8ET1GT1GF-96
Бренд: Dahua Страницы: 17
FeinTech VMS02400 Instruction Manual preview
VMS02400
Бренд: FeinTech Страницы: 22
Exsys EX-1190HMVS-PD Manual preview
EX-1190HMVS-PD
Бренд: Exsys Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды