manualshive.com logo in svg

LevelOne GTL-2881, Руководство пользователя

"LevelOne GTL-2881" - это мощный гигабитный коммутатор с 8 портами. Для того чтобы ознакомиться с функционалом устройства, вы можете загрузить бесплатное Руководство пользователя с нашего сайта. Наслаждайтесь превосходным качеством с LevelOne GTL-2881! Скачайте руководство на manualshive.com.

Поделиться
Скачать
background image

Chapter 14

  |  Multicast Filtering

Layer 2 IGMP (Snooping and Query for IPv4)

–  530  –

By default, the switch immediately enters into “multicast flooding mode” when 
a spanning tree topology change occurs. In this mode, multicast traffic will be 
flooded to all VLAN ports. If many ports have subscribed to different multicast 
groups, flooding may cause excessive packet loss on the link between the 
switch and the end host. Flooding may be disabled to avoid this, causing 
multicast traffic to be delivered only to those ports on which multicast group 
members have been learned. Otherwise, the time spent in flooding mode can 
be manually configured to reduce excessive loading.

When the spanning tree topology changes, the root bridge sends a proxy 
query to quickly re-learn the host membership/port relations for multicast 
channels. The root bridge also sends an unsolicited Multicast Router Discover 
(MRD) request to quickly locate the multicast routers in this VLAN.

The proxy query and unsolicited MRD request are flooded to all VLAN ports 
except for the receiving port when the switch receives such packets.

◆

TCN Query Solicit

 – Sends out an IGMP general query solicitation when a 

spanning tree topology change notification (TCN) occurs. (Default: Disabled)

When the root bridge in a spanning tree receives a TCN for a VLAN where IGMP 
snooping is enabled, it issues a global IGMP leave message (or query 
solicitation). When a switch receives this solicitation, it floods it to all ports in 
the VLAN where the spanning tree change occurred. When an upstream 
multicast router receives this solicitation, it immediately issues an IGMP general 
query.

A query solicitation can be sent whenever the switch notices a topology 
change, even if it is not the root bridge in spanning tree.

◆

Router Alert Option

 – Discards any IGMPv2/v3 packets that do not include the 

Router Alert option. (Default: Disabled)

As described in Section 9.1 of RFC 3376 for IGMP Version 3, the Router Alert 
Option can be used to protect against DOS attacks. One common method of 
attack is launched by an intruder who takes over the role of querier, and starts 
overloading multicast hosts by sending a large number of group-and-source-
specific queries, each with a large source list and the Maximum Response Time 
set to a large value.

To protect against this kind of attack, (1) routers should not forward queries. 
This is easier to accomplish if the query carries the Router Alert option. (2) Also, 
when the switch is acting in the role of a multicast host (such as when using 
proxy routing), it should ignore version 2 or 3 queries that do not contain the 
Router Alert option.

◆

Unregistered Data Flooding

 – Floods unregistered multicast traffic into the 

attached VLAN. (Default: Disabled)

Once the table used to store multicast entries for IGMP snooping and multicast 
routing is filled, no new entries are learned. If no router port is configured in the 
attached VLAN, and unregistered-flooding is disabled, any subsequent 
multicast traffic not found in the table is dropped, otherwise it is flooded 
throughout the VLAN.

Содержание GTL-2881



































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для GTL-2881

S&C 2000 series Instructions For Field Assembly And Installation preview
2000 series
Бренд: S&C Страницы: 26
S&C 2000 series Installation And Operation Manual preview
2000 series
Бренд: S&C Страницы: 37
S&C 2000 series Installation Manual preview
2000 series
Бренд: S&C Страницы: 28
D-Link EasySmart DGS-1100-08 Manual preview
EasySmart DGS-1100-08
Бренд: D-Link Страницы: 44
pathway 7748 Manual preview
7748
Бренд: pathway Страницы: 28
GE T1000 Technical Manual preview
T1000
Бренд: GE Страницы: 302
QCT QuantaMesh T1048-LB9M Installation Manual preview
QuantaMesh T1048-LB9M
Бренд: QCT Страницы: 34
SMART-AVI HDR4X2 Installation Manual preview
HDR4X2
Бренд: SMART-AVI Страницы: 2
Key Digital KD-MS4x4G-2 Manual preview
KD-MS4x4G-2
Бренд: Key Digital Страницы: 20
Eaton P1 XM Series Instruction Leaflet preview
P1 XM Series
Бренд: Eaton Страницы: 2
S&C Omni-Rupter Series Installation And Operation Manual preview
Omni-Rupter Series
Бренд: S&C Страницы: 31
Lantech IES-5222T Series User Manual preview
IES-5222T Series
Бренд: Lantech Страницы: 30
FS S5850-24XMG Quick Start Manual preview
S5850-24XMG
Бренд: FS Страницы: 43
Versitron SG70660M Installation Manual preview
SG70660M
Бренд: Versitron Страницы: 46
SOMFY COMMANDE MURALE RTS Manual preview
COMMANDE MURALE RTS
Бренд: SOMFY Страницы: 2
TE Connectivity FSA-PLUS Technical Manual preview
FSA-PLUS
Бренд: TE Connectivity Страницы: 32
Omnitron Systems Technology iConverter GX/X User Manual preview
iConverter GX/X
Бренд: Omnitron Systems Technology Страницы: 2
AMERITRON RCS-12 Instruction Manual preview
RCS-12
Бренд: AMERITRON Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды