LevelOne GEP-5070 Скачать руководство пользователя страница 227

Страница: 227 / 318

HAPTER

| Monitoring the Switch

Displaying Information About Ports

– 227 –

■

Broadcast

– The number of received and transmitted broadcast

packets (good and bad).

■

Pause

– A count of the MAC Control frames received or transmitted

on this port that have an opcode indicating a PAUSE operation.

◆

Receive

Transmit Size Counters

– The number of received and

transmitted packets (good and bad) split into categories based on their

respective frame sizes.

◆

Receive

Transmit Queue Counters

– The number of received and

transmitted packets per input and output queue.

◆

Receive Error Counters

■

Rx Drops

– The number of inbound packets which were discarded

even though no errors had been detected to prevent their being

delivered to a higher-layer protocol. One possible reason for

discarding such a packet could be to free up buffer space.

■

Rx CRC/Alignment

– The number of frames received with CRC or

alignment errors.

■

Rx Undersize

– The total number of frames received that were less

than 64 octets long (excluding framing bits, but including FCS

octets) and were otherwise well formed.

■

Rx Oversize

– The total number of frames received that were

longer than the configured maximum frame length for this port

(excluding framing bits, but including FCS octets) and were

otherwise well formed.

■

Rx Fragments

– The total number of frames received that were

less than 64 octets in length (excluding framing bits, but including

FCS octets) and had either an FCS or alignment error.

■

Rx Jabber

– The total number of frames received that were longer

than the configured maximum frame length for this port (excluding

framing bits, but including FCS octets), and had either an FCS or

alignment error.

■

Rx Filtered

– The number of received frames filtered by the

forwarding process.

◆

Transmit Error Counters

■

Tx Drops

– The number of frames dropped due to output buffer

congestion.

■

Tx Late/Exc. Coll.

– The number of frames dropped due to late or

excessive collisions.

Содержание GEP-5070































































































































































































































































































































Результаты поиска

Содержание GEP-5070

Отзывы:

Похожие инструкции для GEP-5070

Бренды по названию

Популярные бренды

LevelOne GEP-5070, Руководство пользователя

Результаты поиска

Содержание GEP-5070

Отзывы:

Похожие инструкции для GEP-5070

Бренды по названию

Популярные бренды