LevelOne GEP-5070 Скачать руководство пользователя страница 181

Страница: 181 / 318

HAPTER

| Configuring the Switch

Protocol VLANs

– 181 –

APPING

ROTOCOL

ROUPS

ORTS

Use the Group Name to VLAN Mapping Table to map a protocol group to a

VLAN for each interface that will participate in the group.

ATH

Advanced Configuration, VCL, Protocol-based VLANs, Group to VLAN

OMMAND

SAGE

◆

When creating a protocol-based VLAN, only assign interfaces using this

configuration screen. If you assign interfaces using any of the other

VLAN menus such as the VLAN Static table (

page 173

), these interfaces

will admit traffic of any protocol type into the associated VLAN.

◆

When a frame enters a port that has been assigned to a protocol VLAN,

it is processed in the following manner:

■

If the frame is tagged, it will be processed according to the standard

rules applied to tagged frames.

■

If the frame is untagged and the protocol type matches, the frame

is forwarded to the appropriate VLAN.

■

If the frame is untagged but the protocol type does not match, the

frame is forwarded to the default VLAN for this interface.

ARAMETERS

These parameters are displayed:

◆

Group Name

– The name assigned to the Protocol VLAN Group. This

name must be a unique 16-character long string which consists of a

combination of alphabetic characters (a-z or A-Z) or integers (0-9).

◆

VLAN ID

– VLAN to which matching protocol traffic is forwarded.

(Range: 1-4095)

◆

Port Members

– Ports assigned to this protocol VLAN.

NTERFACE

To map a protocol group to a VLAN for a port or trunk:

Click Configuration, VCL, Protocol-based VLANs, Group to VLAN.

Enter the identifier for a protocol group.

Enter the corresponding VLAN to which the protocol traffic will be
forwarded.

Select the ports which will be assigned to this protocol VLAN.

Click Save.

Содержание GEP-5070































































































































































































































































































































Результаты поиска

Содержание GEP-5070

Отзывы:

Похожие инструкции для GEP-5070

Бренды по названию

Популярные бренды

LevelOne GEP-5070, Руководство пользователя

Результаты поиска

Содержание GEP-5070

Отзывы:

Похожие инструкции для GEP-5070

Бренды по названию

Популярные бренды