LevelOne GEP-5070 Скачать руководство пользователя страница 171

Страница: 171 / 318

HAPTER

| Configuring the Switch

Configuring the MAC Address Table

– 171 –

ARAMETERS

These parameters are displayed:

Aging Configuration

◆

Disable Automatic Aging

- Disables the automatic aging of dynamic

entries. (Address aging is enabled by default.)

◆

Aging Time

- The time after which a learned entry is discarded.

(Range: 10-1000000 seconds; Default: 300 seconds)

MAC Table Learning

◆

Auto

- Learning is done automatically as soon as a frame with an

unknown source MAC address is received. (This is the default.)

◆

Disable

- No addresses are learned and stored in the MAC address

table.

◆

Secure

- Only static MAC address entries are used, all other frames are

dropped.
Make sure that the link used for managing the switch is added to the

Static MAC Table before changing to secure learning mode. Otherwise

the management link will be lost, and can only be restored by using

another non-secure port or by connecting to the switch via the serial

interface.

OTE

If the learning mode for a given port in the MAC Learning Table is

grayed out, another software module is in control of the mode, so that it

cannot be changed by the user. An example of such a module is the MAC-

Based Authentication under 802.1X.

Static MAC Table Configuration

◆

VLAN ID

- VLAN Identifier. (Range: 1-4095)

◆

MAC Address

- Physical address of a device mapped to a port.

A static address can be assigned to a specific port on this switch. Static

addresses are bound to the assigned port and will not be moved. When

a static address is seen on another port, the address will be ignored

and will not be written to the address table.

◆

Port Members

- Port identifier.

NTERFACE

To configure the MAC Address Table:

Click Configuration, MAC Table.

Change the address aging time if required.

Specify the way in which MAC addresses are learned on any port.

Содержание GEP-5070































































































































































































































































































































Результаты поиска

Содержание GEP-5070

Отзывы:

Похожие инструкции для GEP-5070

Бренды по названию

Популярные бренды

LevelOne GEP-5070, Руководство пользователя

Результаты поиска

Содержание GEP-5070

Отзывы:

Похожие инструкции для GEP-5070

Бренды по названию

Популярные бренды