LevelOne GEP-5070 Скачать руководство пользователя страница 146

Страница: 146 / 318

HAPTER

| Configuring the Switch

IGMP Snooping

– 146 –

passing between multicast clients and servers, and dynamically configure

the switch ports which need to forward multicast traffic.

Multicast routers use information from IGMP snooping and query reports,

along with a multicast routing protocol such as DVMRP or PIM, to support

IP multicasting across the Internet.

ATH

Advanced Configuration, IPMC, IGMP Snooping, Basic Configuration

ARAMETERS

These parameters are displayed:

Global Configuration

◆

Snooping Enabled

- When enabled, the switch will monitor network

traffic to determine which hosts want to receive multicast traffic.

(Default: Enabled)
This switch can passively snoop on IGMP Query and Report packets

transferred between IP multicast routers/switches and IP multicast host

groups to identify the IP multicast group members. It simply monitors

the IGMP packets passing through it, picks out the group registration

information, and configures the multicast filters accordingly.

◆

Unregistered IPMC Flooding Enabled

- Floods unregistered

multicast traffic into the attached VLAN. (Default: Disabled)
Once the table used to store multicast entries for IGMP snooping is

filled, no new entries are learned. If no router port is configured in the

attached VLAN, and Unregistered IPMC Flooding is disabled, any

subsequent multicast traffic not found in the table is dropped,

otherwise it is flooded throughout the VLAN.

◆

IGMP SSM Range

- The Source-Specific Multicast Range allows SSM-

aware hosts and routers to run the SSM service model for groups in the

specified address range. (Default: 232.0.0.0/8)
IPv4 addresses in the 232.0.0.0 to 232.255.255.255 range are

currently designated by RFC 4607 as SSM destination addresses and

are reserved for use by source-specific applications and protocols.

SSM-aware hosts and routers running the SSM service model can pass

traffic for any group within the specified address range.
When using IGMPv3 snooping (see the Compatibility parameter under

"Configuring VLAN Settings for IGMP Snooping and Query"

), service

requests from IGMP Version 1, 2 or 3 hosts are all forwarded to the

upstream router as IGMPv3 reports. The primary enhancement

provided by IGMPv3 snooping is in keeping track of information about

the specific multicast sources which downstream IGMPv3 hosts have

requested or refused. The switch maintains information about both

multicast groups and channels, where a group indicates a multicast

flow for which the hosts have

not

requested a specific source (the only

option for IGMPv1 and v2 hosts unless statically configured on the

switch as described under

"Configuring IGMP Filtering"

), and a channel

indicates a flow for which the hosts have requested service from a

Содержание GEP-5070































































































































































































































































































































Результаты поиска

Содержание GEP-5070

Отзывы:

Похожие инструкции для GEP-5070

Бренды по названию

Популярные бренды

LevelOne GEP-5070, Руководство пользователя

Результаты поиска

Содержание GEP-5070

Отзывы:

Похожие инструкции для GEP-5070

Бренды по названию

Популярные бренды