LevelOne FEP-0840, Руководство пользователя

Страница: 37 / 54

http://www.level1.com 37
VLAN Member in Tag Based Mode
In Tag Based Mode you need to define and configure your VLAN groups. Since you want the
handover to other switches take place smoothly, the VLAN IDs (Numbers) need to be alike
on the rest of your network. On other switches you may have the chance to configure names
for your reference, but only the numbers are meaningful.
Firstly, you need to add VLAN Groups (identified throughout your network by unique and
constant numbers). Start with IDs from 100 and up. Keep in mind that some switches use
“
1
” as the default, while others use “
4095
” or “
4096
” as default. Starting with 100 gives you
enough free room and less compatibility issues.
Enter “100” in the field right of VID Setting, and select or deselect which ports are member
of that group. Set your uplink/downlink ports as a member of every existing group. Then
click on Add . The group with new setting will be displayed at the bottom of the screen.
For the PVID Setting, you define VLAN group to which incoming traffic belongs. For
example, Port 1 is a member of Group 100 and 101. With PVID, you may define if the data
sending out from port 1 are for Group 100 or 101.