LevelOne FEP-0840, Руководство пользователя

Страница: 54 / 54

http://www.level1.com
54
Appendix B: Troubleshooting
This appendix is to help identify and solve the problems. If the web smart switch is not
working correctly with your network, check the items as the following;

Make sure the Power is ON (Check the Power LED).

Make sure the cable is connected properly on both ends.

Make sure that the standard CAT.5 cable is used.

Verify that the cable length does not exceed 100 meters.

Check the LED indicators are working properly.

Check the status of the cable attachment, or try a different cable.

Try another port on the Switch.

Turn off the power, and on again after a while and check if it resumes normally.
Contact your local dealer for technical support, if you find no way out.
B.1 Can NOT Access Web Page?
Web Browser is a useful tool to configure the web smart PoE switch. When you have
problems in accessing the default IP address
http://192.168.2.1 of web page, one of the most
possibility is that the PC might have different subnet IP settings from 192.168.2.x . In this
case, you must change PC IP address to the same subnet as the web page.
Please refer to Section 4.1 to configure your PC address to the same subnet as the web
management.
B.2 Forget IP Address, User ID, and Password?
The default reset button can be used when the user forgot the IP address, user ID, and password,
and can NOT login to the web page.
Please follow the steps to reset the Web Smart Switch back to the default values.
Step 1. Turn on the PoE Switch.
Step 2. Press and hold the reset button continuously for 5 seconds and release the reset
button.
Step 3. The switch will reboot for 20 seconds and the configuration of switch will back to
the default setting.