Quick Start Guide HS 6578
Leuze
electronic
Page
6
Installation
Connect the hand-held scanner
Switching off the computer
Information on switching off and shut down the connected computer - what ever before to connect peripheral
devices such as a scanner is - please refer to the instruction manual of your computer.
Connect the cable to the Base f. HS 6578
The following illustrations show the steps required to install the cable at the base station are shown, which are
described below.
1.
Plug the interface cable to the host port.
2.
Connect the other end of the interface cable to the PC, PLC or MA
3.
Plug the cable from the adapter to the power port.
4.
Connect the other end to the power adapter and plug it into the outlet.
Connect the hand scanner HS 6578 with the Base
5.
Insert the battery into the HS 6578th see Figures
6.
Scan the bar code, PAIR 'on the base.
7.
The connection is now established. Scan the appropriate
code for your application in the section configuration from
page
10
