Quick Start Guide HS 6578
Leuze
electronic
Page 19
You will find further adjustment in the:
User’s Guide HS 6578
Parameters for code types share, number, etc...
Troubleshooting
Problem detection and troubleshooting check your scanner as follows:
1. The base station is powered from a power supply of 9 volts DC. Check whether this power supply is
plugged in correctly.
2. Make sure that the interface cable is firmly attached to the computer. In the manual of the computer
for information about the correct connection of the scanner. Get support for your technical staff.
3. Work your system with an external power supply, make sure that the power supply unit is wired to the
scanner and power supply.
4. Check that the interface cable is securely attached to the base. Cable lock to push down and pull out
the cable. Introduce the cable again and make sure that it is properly located in the plug connection.
5. Check whether the scanner is loaded possibly set in the charging cradle.
6. Should be the scanner despite all these measures not in operational readiness, discard the power
supply against a different recommended power supply, you sure know that it is operational.
7. Ensure that the interface of your scanner with the computer is compatible. Desired application is
configured. This information is at the user's Guide of HS 6578 described.
8. Make sure that the barcode label that you want to scan, are of satisfactory quality and that the used
bar code symbology is recognized by your scanner. Pattern label to check you get from your dealer,
you need accurate information of the label details. Damaged bar code labels (rumpled, torn or dirty)
can cause that the scanner detects the label only poorly or not at all. Suspect the problem in the
quality of the label, check the reading readiness with a qualitatively good label.
9. Should the problems be now, still not resolved, contact Leuze electronic in conjunction.
