Quick Start Guide HS 6578
Leuze
electronic
Page 16
HS 6578 at USB-Interface (COM-Port-Emulation)
In this chapter, the operation of the HS 6578 is described as a serial interface to USB. In this mode, a COM
port is emulated. The scanned data is sent to a new COM port. The driver allows you to emulate this COM
interface, you can download on our website
www.leuze.de
. Thus, the data in the data programs via COM
interfaces expected to be further processed.
Required parts:
1x
50120442
HS 6578 DPM
1x
50120446
Base f. HS 6578
1x
50120430
NT Base 6578
1x
50120432
KB USB-1 HS 65x8
Please connect the HS 6578 according to the
figure below.
Initial Operation
Please do the following:
1. Connect the cable to the Base HS 6578 to
a free USB-Port.
2. The Scanner send a Beep as acknowledge.
3. Scan the Data Matrix Code below
4. Scan the bar code, PAIR 'on the base.
5. Scan the bar code below
6. Install usbcdc.inf the USB serial driver when prompted by Windows.
7. Open a Terminal program or your Program for the serial interface on the PC, and choose the new
COM-Port
8. Scan for testing a Barcode or 2D-Code, e.g. Test Symbol
Parameterization
COM-Port-Emulation at next free COM-Address, with CR/LF as Postfix, Standard Codes and Code 2/5
Interleaved with 10 digits.
Scan order from left to right
Barcode PAIR
on Base
+
+