Quick Start Guide HS 6578
Leuze
electronic
Page 12
HS 6578 at MA 200
i
RS 232-Data Transmission with 9600 Baud, 8 Data bit, 1 Stopbit, No Parity, Postfix CR/LF.
Required parts:
1x
50120442
HS 6578 DPM
1x
50120436
KB 232-2 HS65x8
1x
50120446
Base f. HS 6578
1x
50120430
NT Base 6578
1x
50113397
KB JST-HS-300
1x
50112893
MA 204i Profibus Gateway
or
MA 208i Ethernet
or
MA 248i Profinet
Initial Operation
Open the MA 200i
Install the KB JST-HS 300 with the high strength cable gland through the threaded hole and connect
the 12-pin JST connector plug.
Connect the cable to connector at the base
Connect the 9-pin D-sub connector on the KB JST-HS-300
Scan the Data Matrix Code
Scan the bar code, PAIR 'on the base.
Set on the address selection switch the address
Plug in the fieldbus connection cables
Connect the Power to the MA 200i
Close the MA 200i
Please refer for details on connecting the MA 200i from the technical description MA 200i.
Parameterization
RS 232 with 9600 Baud, 8 Data bit, 1 Stopbit,
No Parity, no Prefix and Postfix CR/LF;
Standard Codes and Code 2/5 Interleaved with
10 digits
Barcode PAIR on Base
+
