Quick Start Guide HS 6578
Leuze
electronic
Page 10
Reset the HS 6578 to factory settings
To reset all parameters to the factory setting you have to scan the code below.
Attention all settings will lose!
Parameterization
Basically, the hand-held scanner is configured via barcodes. This, first select the bar code is in the manual,
and then press the trigger button to read the code. The configuration is then immediately active.
A second option is to configure the hand scanner with USB and RS232 interface using the PC program ESP.
This program lets you download and install from our website
www.leuze.de
. With the program settings can be
made and transmitted to the hand-held scanner. The configuration can also be stored, so that later it can be
reused.
For more information see also in the
User’s Guide to HS 6578.
In the following are some of the most important configurations.
