Leuze 50137593 Скачать руководство пользователя страница 10

Страница: 10 / 73

Safety

Leuze electronic GmbH + Co. KG

AMS 307

TNT

35/7-2

2.2

Foreseeable misuse

Any use other than that defined under "Intended use" or which goes beyond that use is

considered improper use.
In particular, use of the device is not permitted in the following cases:

• in rooms with explosive atmospheres
• as stand-alone safety component in accordance with the machinery directive

• for medical purposes

2.3

Competent persons

Connection, mounting, commissioning and adjustment of the device must only be carried out

by competent persons.
Prerequisites for competent persons:

• They have a suitable technical education.
• They are familiar with the rules and regulations for occupational safety and safety at

work.

• They are familiar with the technical description of the device.
• They have been instructed by the responsible person on the mounting and operation

of the device.

Certified electricians

Electrical work must be carried out by a certified electrician.
Due to their technical training, knowledge and experience as well as their familiarity with rele

vant standards and regulations, certified electricians are able to perform work on electrical

systems and independently detect possible dangers.
In Germany, certified electricians must fulfill the requirements of accident-prevention regu

lations DGUV (German Social Accident Insurance) provision 3 (e.g. electrician foreman). In

other countries, there are respective regulations that must be observed.

1) Use as safety-related component within the safety function is possible, if the component combination is designed cor

respondingly by the machine manufacturer.

NOTE
Do not modify or otherwise interfere with the device!



Do not carry out modifications or otherwise interfere with the device.
The device must not be tampered with and must not be changed in any way.

The device must not be opened. There are no user-serviceable parts inside.

Repairs must only be performed by Leuze electronic GmbH + Co. KG.

Содержание 50137593










































































Результаты поиска

Содержание 50137593

Отзывы:

Похожие инструкции для 50137593

Бренды по названию

Популярные бренды

Leuze 50137593, Оригинальная инструкция по эксплуатации

Результаты поиска

Содержание 50137593

Отзывы:

Похожие инструкции для 50137593

Бренды по названию

Популярные бренды