Diagnostics and troubleshooting
58
AMS 307
i
Leuze electronic GmbH + Co. KG
10.2
General causes of errors
10.2.1 Power LED
10.3
Interface errors
10.3.1 BUS LED
Error
Possible error cause
Measure
PWR LED "OFF"
No supply voltage connected
Check supply voltage.
Hardware error
Send in device.
PWR LED "flashes
red"
Light beam interruption
Check alignment.
Plausibility error
Traverse rate >10m/s.
PWR LED "static red" Hardware error
For error description, see display,
It may be necessary to send in the device.
Table 10.1:
General causes of errors
Error
Possible error cause
Measure
BUS LED "OFF"
No supply voltage connected
Check supply voltage.
Incorrect wiring
Check wiring.
SSI deactivated
Activate SSI interface in AMS 307
i
.
Table 10.2:
Bus error