Mounting
Leuze electronic
DDLS 508
23
Table 4.2:
Distance of laser spots
Horizontal alignment
Align the laser spots using the alignment screw (8) at the lower right.
The integrated alignment laser, the level, as well as the device transmitter are optimally matched
to one another ex works. Minimal mechanical tolerances are, however, unavoidable and gene
-
rate a very small error angle. The use of the alignment laser is therefore limited to a maximum
distance between the devices.
For information on the distance to which the alignment laser can be used as a function of the
mounting height of the device, see table 4.2.
Mounting height
of the device
Distance of laser spots on floor
Alignment laser
usable to
Laser spot 1
Laser spot 2
Laser spot 3
Laser spot 4
3.0 m
6.7 m
9.2 m
14.1 m
28.5 m
44 m
2.5 m
5.6 m
7.7 m
11.8 m
23.8 m
40 m
2.0 m
4.5 m
6.2 m
9.4 m
19.0 m
37 m
1.5 m
3.4 m
4.6 m
7.1 m
14.3 m
32 m
1.0 m
2.2 m
3.1 m
4.7 m
9.5 m
25 m
0.5 m
1.1 m
1.5 m
2.4 m
4.8 m
16 m
Notice:
The listed mounting heights of the device are examples. The device can be mounted at any desired
height. The distances of the laser spots on the floor change according to the selected mounting height.
