Important Parameters
50
BCL 8
Leuze electronic
Deactivation
10.4
Host interface tab
Figure 10.5:
Host interface tab
Select the desired baud rate, the stop bits, the data bits, the parity and various transmission
modes here. These parameters are not active until following the automatic "Power-On" test
after the BCL 8 is switched on.
Switching input 1
function
See menu "switching input"
Immediately after
complete decode
result
If this item is activated, the read result is output immediately after the
bar code is decoded.
If the item is deactivated, the read result is sent only after the trigger
signal is returned (=end of reading gate).
Command
character
The standard online character for the trigger end is the ´-´ character.
This character can be changed only via the tree structure.
Time
If the scanner is activated, the reading gate is automatically closed by
the scanner after this preset time has elapsed (e.g. for test purposes).
Scans without info
Following a successful read, the scanner waits for this number of
scans (sequential scans with no read result) before it automatically
deactivates itself.
